

|
CUSTOM
SHOW BITS
These
bits are custom hand made and take 5-6 weeks
The bits can be made in any of the finishes listed below
Finishes
-Stainless steel with .925 silver overlay (This is probably what
you are most use to in a show bit. It is sweet iron mouth piece
with copper inlay and the shanks are steel with sterling silver
overlay. The mouth will rust, but horses like the taste. To
minimize the rust on the mouth, clean the bit after use).
Blue with .999 silver Inlay-Rust (patina) with .999 silver Inlay
Copper (brown) with .999 silver inlay-Black with .999 silver inlay
This is
done by a heating process. The color will eventually wear off
and turn a brown color. The mouth piece is sweet iron with a
copper inlay. These bits WILL RUST. Some people, especially
cowboys, find this desirable. The rust can be minimized by coating
the bit often with oil. Color can be put back into the bits
if the rust is not too bad.
*** In Memo field on order page
put leverage desired (straight, slightly back or standard) , copper rollers on bars , slobber chain instead of solid bar
If left empty we will give you the standard leverage , no rollers and solid slobber bar
You can also customize your bit. Just tell us want you need or want and it can be made. For example if you like a concho on one bit but the shank on another or a larger concho. NO problem it can be made.
Can also change mouthpieces on your old bit - cost is approx $115-140 (depending on mouthpiece) plus shipping.
MORE BITS by
Classic Equine by Gary Gist , Les Vogt's Performax Bit Leverage Position #1, Les Vogt's Bit Leverage Position #2
Les Vogt's Bit Leverage Position #3, Les Vogt's SNAFFLES, SPURS
|

1511
Shown in Black silver inlay with mouth 08. Shanks are slightly curved back
list $450 ours $349.99order |

1513
Shown in Black silver inlay with mouth 02. Shanks are straight
list $450 ours $349.99order
|

1516 (2 1/4" large concho)
Shown in Black silver inlay with mouth 01. Shanks are S shaped
list $450 ours $399.99order
3 1/4" concho list $550 ours $469.99 order
|

1539
Shown in Brown silver inlay with mouth 02. Shanks are slightly curved back
list $450 ours $349.99order
|

1542
Shown in Steel with Silver Inlay in Black with mouth 01 Shank/Cheek: SlightlyCurved Back
list $450 ours $349.99order
|

1547 (2 1/4" large concho)
Shown in Patina (rust) with Silver Inlay and mouth 35.Shank/Cheek: Slightly Curved Back
list $500 ours $399.99order
3 1/4" concho list $550 ours $469.99 order
|

1505
Shown in Steel with Silver Inlay bit pictured in Black with a medium concho and chevron stripes, and a Real Billy Allen or Forward Tilt Mullen mouthpiece (MP-53).Shank/Cheek: Curved Back
list $450 ours $349.99order
|

1614 (2 1/4" large oval concho)
Shown in Blued steel with Silver Inlay bit ,mouthpiece-02.
Shank/Cheek: Curved Back
list $470 ours $399.99order
3 1/4" concho list $550 ours $469.99 order
|

1642
Shown in steel with Silver Inlay in Patina (Rust color without a shine) with a medium concho, 4 dots (small conchos) and flashed edges, mouth -02, and bit ends with a bar.
Shank/Cheek: Slightly Curved Back
list $450 ours $349.99order
|

1644
Shown in Steel with Silver Inlay in Black with a medium concho and chevron stripes, and a mouthpiece -53.Shank/Cheek: Curved Back
list $450 ours $349.99order |

1506
Shown in blued steel with Silver Inlay bit with medium & small conchos on the cheeks, and a Spade Snaffle-43 mouthpiece.Shank/Cheek: Slightly Curved Back
list $450 ours $349.99order |

1531
Shown in blued Steel with Silver Inlay with a Salinas mouthpiece -02, and bit ends with a bar. Shank/Cheek: Straight
list $450 ours $349.99order
|

1018
Shown in silver overlay with mouth 21. Shanks are slightly curved back
list $450 ours $349.99order |

1023
Shown in silver overlay with mouth 02. Shanks are slightly curved back
list $450 ours $349.99order
|

1024
Shown in silver overlay with mouth 02. Shanks slightly curved back
list $450 ours $349.99order
|

1029
Shown in silver overlay with mouth 07. Shanks are slightly curved back
list $490 ours $399.99order
|

1032
Shown in silver overlay with mouth 07. Shanks are S shaped
list $450 ours $349.99order |

1038
Shown in silver overlay with mouth 02. Shanks are almost straight
list $450 ours $349.99order
|

1039
Shown in silver overlay with mouth 02. Shanks are slightly curved back
list $450 ours $349.99order
|

1042
Shown in silver overlay with mouth 40. Shanks are slightly curved back
list $450 ours $349.99order
|

1043
Shown in silver overlay with mouth 19. Shanks are slightly curved back
list $450 ours $349.99order |

1049
Shown in silver overlay with mouth 07. Shanks are almost straight
list $450 ours $349.99order
|

1059
Shown in silver overlay with mouth 02. Shanks are S Shaped
list $450 ours $349.99order
|

1557 (2 1/4"large concho)
Shown in Black silver inlay with mouth 07. Shanks are slightly curved back
list $500 ours $399.99order
3 1/4" concho list $550 ours $469.99 order
|

1559
Shown in silver overlay with mouth 10. Shanks are slightly curved back
list $450 ours $349.99order
|

1570 (2 1/4" large concho)
Shown in Black silver inlay with mouth 07. Shanks are straight
list $500 ours $399.99order
3 1/4" concho list $550 ours $469.99 order
|

1580
Shown in Blue silver inlay with mouth 02. Shanks are S Shaped
list $450 ours $349.99order
2 1/4"large concho
list $490 ours $399.99order
3 1/4" concho list $550 ours $469.99order
|

1558
Shown in Black silver inlay with mouth 11. Shanks are curved back
specify with chain or solid bar
list $450 ours $349.99order |

07
Low port mouthpiece with copper roller and hood, no tongue relief.
- Height of Mouthpiece: Low (aprox 1" - 1 1/4")
|

08
Low port mouthpiece with copper roller, no tongue relief. (Same as -07 but without a copper hood.)
- Height of Mouthpiece: Low (aprox 1" - 1 1/4")
|

23
Lower mouthpiece with some tongue relief. (Same as MP-10 but without the roller.)
- Height of Mouthpiece: Lower (aprox 1" & under)
|

22
Low mouthpiece with tongue relief.
- Height of Mouthpiece: Low (aprox 1" - 1 1/4")
|

54
Lower mouthpiece with some tongue relief.
- Height of Mouthpiece: Lower (aprox 1" & under)
|

33
Low mouthpiece with tongue relief.
- Height of Mouthpiece: Low (aprox 1" - 1 1/4")
|

34
Low port mouthpiece with copper roller, tongue relief.
- Height of Mouthpiece: Low (aprox 1" - 1 1/4")
|

24
Lower mouthpiece with tongue relief, has two copper rollers on the bars, is pretty popular, not severe -- has movement to sides, up and down (same as MP-45).
- Height of Mouthpiece: Aprox. 1" & under
|

53 -forward tilt
Lower mouthpiece with tongue relief is pretty popular, not severe -- has movement to sides, up and down (same as MP-45).
- Height of Mouthpiece: Lower (aprox 1" & under)
|

10
Lower port mouthpiece with copper roller, no tongue relief. (Same as MP-23 but with a roller)
- Height of Mouthpiece: Lower (aprox 1" & under)
|

51
Low Rounded port mouthpiece; it's solid without movement with some tongue relief.
- Height of Mouthpiece: Low (aprox 1" - 1 1/4")
|

11
Medium mouthpiece with a iron cricket with lines of copper Inlay, some tongue relief.
Height of Mouthpiece: Medium (aprox 1 1/2")
|

12
Medium mouthpiece with a iron cricket with lines of copper Inlay, no tongue relief, copper cover and bar thickness
- Height of Mouthpiece: Medium (aprox 1 1/2")
|

15
Medium mouthpiece with a copper cricket, some tongue relief, bar is thinner than MP-11 & MP-12.
- Height of Mouthpiece: Medium (aprox 1 1/2")
|

21
Medium mouthpiece with tongue relief.
- Height of Mouthpiece: Medium (aprox 1 1/2")
|

39
Medium mouthpiece with a iron cricket with lines of copper Inlay, no tongue relief, copper cover and bar thinner than MP-15. (Same as MP-12 but with a thinner bar)
- Height of Mouthpiece: Medium (aprox 1 1/2")
|

42
High Ported mouthpiece has a lot of movement to the sides ,up and down. (Same as MP-47 but without a copper cricket or roller.)
- Height of Mouthpiece: High (aprox. 2")
|

47
High Ported mouthpiece with a copper cricket, has a lot of movement to the sides ,up and down. (Same as MP-42 but with a copper cricket, roller.)
- Height of Mouthpiece: High (aprox. 2")
|

35
High pointed port mouthpiece with copper roller, no tongue relief.
- Height of Mouthpiece: High (aprox. 2")
|

14
Extra High mouthpiece with spoon, iron cricket and copper wires.
- Height of Mouthpiece: Extra High (aprox 3"- 4")
- Tongue Relief: No Tongue Relief
|

30
Higher mouthpiece with straight bar, iron roller, spoon and copper wires.
- Height of Mouthpiece: Higher (aprox 2 1/2")
- Tongue Relief: No Tongue Relief
|

50
High port mouthpiece with tongue relief. The thickness of the bars and port is the same but the upper part of the port is flat. Pretty severe -- more than MP-19 and less than MP-32. (Same as MP-19 but upper part of port is flat.)
- Height of Mouthpiece: High (aprox. 2")
|

40
High narrow port mouthpiece with copper roller and hood, some tongue relief.
- Height of Mouthpiece: High (aprox. 2")
|

49
High port mouthpiece with tongue relief.
- Height of Mouthpiece: High (aprox. 2")
|

27
High port mouthpiece with tongue relief.
- Height of Mouthpiece: High (aprox. 2")
|

20
High port mouthpiece, tongue relief.
- Height of Mouthpiece: High (aprox. 2")
|

19
High port mouthpiece with tongue relief. Same thickness for the bars and port.
- Height of Mouthpiece: High (aprox. 2")
|

16
High port mouthpiece with 4 copper Crickets , no tongue relief.
- Height of Mouthpiece: High (aprox. 2")
|

09
High port mouthpiece with copper roller, no tongue relief.
Height of Mouthpiece: High (aprox. 2") |

06
High port mouthpiece with copper roller, tongue relief.
- Height of Mouthpiece: High (aprox. 2")
|

03
High port mouthpiece with copper roller, some tongue relief.
- Height of Mouthpiece: High (aprox. 2")
|

02
High port with copper roller and hood, some tongue relief.
- Height of Mouthpiece: High (aprox. 2")
|

01
High port with copper roller and hood, some tongue relief.
- Height of Mouthpiece: High (aprox. 2")
|

28
High port mouthpiece with 4 copper rollers.
- Height of Mouthpiece: High (aprox. 2")
|

32
High mouthpiece. The arms of the bar are thicker than the port. The port is thin at the top. Pretty severe -- the most severe of the three: MP-19, MP-32, and MP-50.
- Height of Mouthpiece: High (aprox. 2")
- Tongue Relief: Tongue Relief
|

26
Extra High port mouthpiece with tongue relief.
- Height of Mouthpiece: Extra High (aprox 3"- 4")
|

25
Two metal pieces attached at the center to form a jointed bar, or snaffle. This type of mouthpiece has a lot of movement to the sides, up and down.
also available in twisted wire 55 |

46
Two metal pieces attached at the center to form a jointed bar with 3 copper rollers. This mouthpiece is pretty popular -- it has a lot of movement to the sides, up and down. |

45
Two metal pieces attached at the center to form a jointed bar with 1 copper roller. This mouthpiece is pretty popular -- it has movement to the sides, up and down. |
MORE BITS MORE BITS by
click on Classic Equine by Gary Gist
click on Les Vogt's Performax Bit Leverage Position #1
click on Les Vogt's Bit Leverage Position #2
click on Les Vogt's Bit Leverage Position #3
click on Les Vogt's SNAFFLES, SPURS
|